Land Rover Do-Over

land rover 2

 

We heard from a customer who want to restore their Series Land Rovers. Land Rovers come in all sizes and styles and take  a lot of wear and tear. Rust Doctor is perfect for rusty metal problems on Rovers and all things rusty metal.

 


 

Hello,
I really like the idea of using Rust Doctor on some of the steel parts for our Series Land Rovers. However, I am hesitant to do so without a little more information. In my reading about magnetite and industrial applications of iron oxide, my understanding is that heat has to be applied to make it work and some type of coating applied thereafter to preserve it. I am wondering if you can tell me how Rust Doctor does this without the need for applying a lot of heat to the steel. If it makes chemical sense, then I am keen to try it!

Do you have any data on the length of time one can expect Rust Doctor to protect the steel in various environments, assuming 2 coats are used, all instructions followed and paint applied where appropriate?

Examples: Vehicle chassis
Steel door frames in vehicles
Steel rims
Steel stair railing outdoors

I would not intentionally apply it to aluminum but given that Land Rovers have some steel supporting parts and aluminum body panels, is there any adverse reaction if a little Rust Doctor gets on the aluminum?

Thank you very much,

Roxanne

 


 

Thank you for your interest in Rust Doctor. I imagine your Land Rover’s get a lot of action and they are now ready for a “update”.

Rust Doctor has been used in the marine, automotive, agriculture industries for almost 20 years. It uses a chemical process to convert Hematite (rust) to Magnetite. There is no heat involved in the conversion process. Magnetite is inert and therefore will not react to water and oxygen so it will not rust and protects the base metal from rusting as well. Depending on the thickness of the converted rust, the base metal will never rust unless the magnetite coating is very thin. In addition to converting the rust, Rust Doctor leaves a clear primer on the surface so you can top coat once the Rust Doctor has cured. A Rust Doctor treated surface has three layers of protection; a magnetite coating, a very good primer and the top coat. In most cases, the treated surface will never rust again. Generally only one coat of Rust Doctor is needed unless the rust is very thick. If two coats are used, the second coat would be applied while the first coat is still tacky. You can use Rust Doctor as a primer on Aluminum.

Here is the basic process for restoring rust and paint with Rust Doctor.

You can apply Rust Doctor over paint and rust. The Rust Doctor will find any rust on the surface and convert it to a non rusting black iron oxide called magnetite. In addition, a clear primer will be left on the surface of the paint and converted rust so you can top coat the surface with any kind or color of paint. You will need to wire brush the surface to remove any loose rust or paint before you apply the Rust Doctor. Be sure there is no loose paint on the surface as loose paint means there is rust behind it. Rust Doctor must come into direct contact with the rust to convert it. We have found the best way to prepare a surface for Rust Doctor treatment is to apply our Grease Doctor water-based cleaner/degreaser to the surface and work it in with the wire brush or a 3M Sanding Pad and then rinse the surface with water. You can use a pressure washer for this process as well. This removes dirt, grease, oil as well as the loose rust and paint. Remember you only need to brush the surface enough to remove loose rust and paint. If the surface has tight rust and paint, only a minimal amount of brushing will be necessary. Don’t be fooled by what looks like a clean surface. It always best to clean the surface before applying Rust Doctor.

Once the surface is clean, you can apply the Rust Doctor. Use a brush or spray gun to apply the Rust Doctor to the surface. If you use a conventional spray gun, use a 19-22 tip. Undercoating guns or Airless Spray guns work very well with this product. You can put Rust Doctor in a pump-up garden sprayer to reach hard to get at places. Rust Doctor will not hurt rubber, glass, plastic, wiring or paint. If you get Rust Doctor on a surface you don’t want it, wipe it off with a wet rag. You can clean your brush, spray gun and etc. with soap and water. There are no strong fumes when using Rust Doctor.

The primer Rust Doctor leaves on the surface when it dries will accept any kind or color of paint, primer, bed lining material, sound deadening material, body filler and fiberglass. You can weld on Rust Doctor treated surface because the magnetite is a metallic structure. When you weld on a Rust Doctor treated surface, you will burn (only light smoke) off the clear primer on the surface. Once you have finished welding and grinding the surface, paint the area with Rust Doctor so it will be primed and ready to paint. The primer on the surface can withstand about 300 degrees of temperature. If your welder is not burning off the primer quickly, you can just knock off the primer where you want to weld with a wire wheel on a drill motor.

Basically treating rusty metal involves a three step process:

1. Clean the surface to remove any surface contamination.
2. Remove any loose rust or paint.
3. Apply Rust Doctor

If you go to our blog  you will see 36+ articles about Rust Doctor projects including car parts and railings.  We have a video on our web site that gives you more information on the ease of using our product to eliminate rust permanently.

The Rust Doctor is non-flammable, non-toxic, and bio-degradable….AND it is easy water clean up!

If you have more questions or need technical assistance on your project, please contact us.

The Rust Doctor Team

PS:

Here is a link to the story on removing rust from railings. Enjoy!

 

Remove Rust from Horse Corrals

Clint Eastwood 

“Sometimes if you want to see changes for the better, you have to take things in you’re your own hands.”  – Clint Eastwood

I’m not sure Clint Eastwood  ever had to restore a corral, but the quote fits for all of you that need to remove rusty metal from your rusted out corrals or fencing.  Most animal lovers like to provide a clean and safe environment for their horses or other animals. The extra bonus is to have a nice looking corral as well. Corrals come in all shapes, sizes and materials. We are focusing on getting metal corrals looking new again with the Rust Doctor.

Corral portable good shape Horse corral horse corral painted

Don’t let your rusty old metal corral panels get so bad that they rust through. Time and the environment can ruin your corrals and your investment.

Here are the steps needed to paint your corrals and breathe new life into them. You can make them look new again and get more life from them. Follow our “Tips & tricks”to prepare the rusty panels or fencing for rust removal and painting . The Rust Doctor gets rid of rust forever. With that in mind, here are some tips that will make removing rust from old metal panels easier and more effective.

1. Get Rid of Rust – Forever

Before you can paint your metal corral panels, you need to make sure that they are free of rust. In order to remove rust buildup on the panels, use a wire brush to scrub areas where rust damage appears. It is important that you brush off loose paint flakes as well. Some customers find it useful to use a power washer to loosen the rust and paint flakes. Spray horizontally if you decide to use this method to keep mud from splashing up. You may find that you need to brush off the bottom rails by hand with a wire brush.

2. Clean the Rusty Metal

Use a water based cleaner/degreaser like the Grease Doctor. This is an important step to remove dirt, grime and other contaminants that may be present. Be sure to rinse thoroughly with water. You can hose it off or use a bucket with water and rag.

4. Apply the Rust Doctor

Once your rusty metal surface is clean and dry, you are ready to paint the rusty corral surfaces.  While you can use a paint brush, many customers prefer to use painting mitts. Paint mittens work best as they are lined with plastic to keep your hands free of paint. The illustration below shows a man using latex gloves under his cotton gloves. This may work for you, but the mitts hold paint better. Paint mittens can be found on-line, at most paint and home improvement stores, such as Home Depot.  We recommend covering the whole surface both painted and rusted metal. As the Rust Doctor dries, it will turn black.  This coating also has a clear primer over the areas you have painted with the Rust Doctor product.

rusty corral

Good example of a rusty metal transformation

5. Painting Your Corral

Now comes the fun part of your project –  choosing a color of paint. We recommend that you top coat your panels with a good quality paint for a maximum benefit. Check with your local paint store which paint would work best in this type of environment.

pipe corral 01

Example of restored corral panels. This looks like a great place for horses to run and train.

6. Clean Up & More

The Rust Doctor makes the use and clean up a breeze.  It is non-toxic, non-flammable and biodegradable and safe to use. You do not need special respirators and ventilation systems as many solvent based products recommend. Clean up? Just use water for cleaning your brushes, or sprayers.

 

We are proud to say that the Rust Doctor products are made in the USA. If you have any questions or need assistance with your rusty metal projects, give us a call or email here.

usa

Happy Trails,

The Rust Doctor Team